|Main Features Comparison Chart:|
|Connects to 10-pin CD changer connector at rear of factory radio||Creates an auxiliary audio input into your factory radio||Can connect to any audio device with an external audio earphone jack output||Includes a dash-mount kit to give a "factory" look to your installation|
|Provides a direct connection into the factory radio||This is NOT an FM modulator||Full digital quality audio played through your factory radio||Comes complete with all wiring harnesses necessary to connect to factory radio and to your audio device|
|Specific Vehicle Application List:||Compatibility Information:|
2002-2005 PT Cruiser
2002-2007 Town & Country
2002-2005 Ram 1500
2002-2003 Stratus Sedan
2002-2004 Grand Cherokee
MUST have 10-pin square connector on rear of radio (see photo below)
NOT compatible with the Chrysler "RB1", "RB4", "RBQ", "RAH", "REV" & "RBK" radios.
If the Chrysler factory external CD changer is installed, it will need to be disconnected for the CPCH102AUX3.5 to work.
The CPCH102AUX3.5 is an Auxiliary Input Converter that is specifically designed to work with the Chrysler factory radios that have the 10-pin square CD changer connector installed in several of the 2002-2008 Chrysler vehicles (Please see Specific Vehicle Application List above). This device will create an external auxiliary input that you can then use to connect the audio from any external audio source, like the audio from an MP3 player, a portable DVD player, computer, video game, any audio device that has an audio output connector.
The CPCH102AUX3.5 plugs into the 10-pin square connector at the rear of the factory radio, as shown in the image to right, and is compatible with all vehicles listed above.
Once this device is installed, you will have created an auxiliary audio input into your factory radio. This aux input includes left & right RCA-type connectors. This is a direct connect device and NOT an FM Modulator. An FM modulator requires you to tune to an FM radio station in order to listen to the audio from the external audio device, and this device does not work like that. Therefore, you will get the highest digital quality audio possible without noise, FM bleadthrough or cassette hiss. Comes complete with all cables and connectors to connect this interface to your vehicle.
Please Note: This is an audio-only connection into the auxiliary input converter, and does not allow you to control the external audio device that is connected to it.