A 3.5mm earphone jack auxiliary input converter for the F150 and other Ford "CAN-Bus" radios with the 'AUX' button!
| Main Features Comparison Chart: |
 Connects to multi-pin connector at rear of factory radio | Creates a 3.5mm earphone-type audio input | Connect to any audio device with an earphone jack | Also has left & right RCA-type connectors for universal connectivity |
| Provides a direct connection into the factory radio |  This is NOT an FM modulator |
Full digital quality audio played through your factory radio | Comes complete with all cables and wires necessary for installation |
Specific Vehicle Application List:
| Compatibility Information:
|
|
Ford
2007-2010 Edge
2008-2010 Escape
2007-2010 Expedition/EL
2006-2010 Explorer/Sport Trac
2005-2010 F-Series (New Body Style - Must have satellite-ready radio)
2005-2010 Focus
2006-2010 Freestar
2005-2007 Freestyle
2006-2010 Fusion
2005-2010 Mustang
2006-2010 Ranger
2008-2010 Taurus/Taurus X |
Lincoln
2006-2010 Mark LT
2007-2010 MKX
2007-2010 MKZ
2007-2010 Navigator
2006 Zephyr
Mercury
2006-2010 Milan
2005-2006 Montego
2007-2010 Mountainer |
MUST have the "AUX" button on radio - Will NOT work with "CD/AUX" Button
Will work with the rear seat entertainment system option if installed
Will work with the satellite radio option if installed.
Note: If both rear seat entertainment option AND satellite radio option are installed, one will need to be disconnected in order to install interface.
IS compatible with navigation equipped vehicles.
IS compatible with Ford Sync System. |
Ford Radio Removal Instructions
Product Description:
The CPFD04AUX3.5 Auxiliary Input Converter connects to the Satellite/Rear Seat Entertainment (RSE) data port of many 2005-2010 Ford CAN-Bus factory radios (Please see Specific Vehicle Application List above), to create an external auxiliary input that you can then use to connect the audio from any external audio source, like the audio from an MP3 player, a portable DVD player, computer, video game, any audio device that has a 3.5mm earphone jack output. Comes complete...nothing else to buy.
This auxiliary input converter connects to the 16-pin connector that is located on the back of the factory radio, shown in the image at right (Click image to see larger photo). Depending on what factory options your vehicle has, there could already be a factory wiring harness plugged into the 16-pin radio connector. The wiring harness that comes with this interface is designed with a 'Y' connector that allows you to reconnect the factory wiring harness, if so equipped, once the interface is installed, keeping all existing factory options functional. If there is no factory wiring harness plugged into the 16-pin connector, the 16-pin 'Y' harness will remain empty after installation.
Once this device is installed, you will have created an auxiliary audio input into your factory radio. This aux input has both a 3.5mm earphone-type plug plus left & right RCA-type connectors (both shown at left). Having both types of audio connectors will provide universal connectivity for any type of connection you’ll need. This will allow you to connect any external audio source using the supplied connectors and play the audio from that external audio source directly through your factory radio speakers. This is NOT an FM Modulator or a cassette adapter but a direct connection into your factory radio. Therefore, you will get the highest digital quality audio possible without noise, FM bleadthrough or cassette ‘hiss’.
