| Main Features Comparison Chart: |
 Zune connects thru 24-pin bottom connector |
Full Zune charging while connected |
Zune is controlled with Zune controls only |
 No Zune control using steering wheel buttons |
| Text display on Zune only |
No built-in auxiliary input |
Full digital quality audio |
Kit comes complete with all cables |
Specific Vehicle Application List:
|
Compatibility Information:
|
Cadillac
1999-2002 Escalade
Chevrolet
1998-2004 Astro Van
1996-2002 Avalanche
1997-2002 Blazer
1997-2002 Camaro - Radio must be AM/FM/Cassette w/"TAPE/AUX" button
1995-1999 Cavalier
1996-1997 Impala
1997-1999 Lumina
1996-2000 Malibu
1995-1999 Monte Carlo
1999-2002 C/K Truck
1995-2002 S10 Truck
1998-2002 Silverado
1995-2002 Suburban
1997-2002 Tahoe
1997-1999 Venture
|
GMC
1999-2001 Envoy
1998-2002 Jimmy
1998-2002 Sonoma
1996-2004 Safari
1995-2002 Sierra
1995-2002 Suburban
1995-2002 Yukon/Denali)
Oldsmobile
1996-1999 Silhouette
Pontiac
(except AM/FM/Single CD radios)
1996-1999 Bonneville
1996-2002 Firebird
1996-2002 Grand AM
1996-2003 Grand Prix
1999 Montana
1996-1999 Sunfire
1996-1998 Transport |
Compatible with all Zune players, including the ZuneHD
NOT compatible with vehicles equipped with 6-disc in-dash CD changers.
NOT compatible with 1995-1999 GM radios with factory satellite-mounted single disc CD player or cassette deck.
NOT compatible with 1995 thru 1999 AM/FM/CD GM radios
IS compatible with 1995-2002 AM-FM-Cassette GM radios.
In 2000-2002 GM vehicles with satellite-mounted factory single disc CD player or cassette deck, the satellite-mounted device will need to be disconnected in order to use the CPGM9AUX3.5.
|
Product Description:
The CPGM9AUXZN Zune interface kit connects to the rear of the factory radio of many 1995-2002 GM vehicles with built in external CD changer capabilities (Please see Specific Vehicle Application List), and is designed to allow you to connect your Zune directly into the factory radio, providing you with digital quality sound from your Zune. This Zune interface will also charge the Zune while connected, plus keeps the Zune controls unlocked, allowing control directly from the Zune itself.
Installation is simple as this Zune Interface kit connects to the 9-pin connector, shown at right, that is located on the back of the factory radio, using the vehicle specific cable that comes with the interface (Click on image to see larger photo of the rear of the radio). You then connect the black ground wire from the Zune interconnect cable to chassis ground, then connect the red wire of the Zune interconnect cable to a 12V switched source and you’re done!
Depending on what factory options your vehicle has, there could already be a factory wiring harness plugged into the 9-pin radio connector. The wiring harness that comes with this interface device is designed with a 'Y' connector that allows you to reconnect the factory wiring harness, if so equipped, once the interface is installed, keeping all existing factory options functional. If there is no factory wiring harness plugged into the 9-pin connector, the 9-pin 'Y' harness will remain empty after installation.
