The PIE AUD-AUX Auxiliary Input Converter converts the CD changer port of many 1998-2006 Audi factory radios into an auxiliary input (Please see Specific Vehicle Application List below). This device is designed to connect to the 13-pin CD changer DIN connector in the rear of the Audi vehicle. However, it is possible to connect behind the factory radio on some Audi radios installed in some vehicles. See the Audi vehicle application list on the VWR-AUX web page.
With this device installed, you will have created an auxiliary audio input to your factory radio, which will now allow you to plug in any external audio source, like the audio from a portable MP3 player, satellite tuner, DVD player, or iPod, into the left & right RCA-type connectors (shown at left), and play the audio from that external audio device directly through your factory radio. This is a direct-connect device and NOT an FM Modulator. An FM modulator requires you to tune to an FM radio station in order to listen to the audio from the external audio device. This device does not work like that.
Comes complete with all cables and connectors to connect this device to your vehicle. See "Additional Add-on Items", shown below, for any additional cables or connectors you might need to connect your audio device to the RCA-type connectors on this interface.
Please Note: This is a direct-connect audio-only auxiliary input converter, and does not allow you to control the external audio device that is connected to it.
Additional Add-on Items You May Need to Complete Installation:
If you need more than one audio input, you can convert the single auxiliary input of this device into three auxiliary inputs by adding the AUX3.
If you are wanting to connect a Zune™ player with this interface, you can connect directly to the bottom connector of the Zune by adding the SoundGate ZNCBLPAK CORE™ Cable pack.
If you are wanting to connect an iPOD™ with this interface, you can connect directly to the bottom connector of the iPOD by adding the SoundGate PDCBLPAK CORE™ Cable pack. (Provides 5V charging for all new iPODs and iPhones, including the 3G)
If you are wanting to connect to the earphone jack of your audio device, you can convert the RCA inputs on this interface to a 3.5mm input by adding the PIE 3.5-RCA6MM Interface.
If you are using this interface to connect the audio from any MP3 player, cell phone or GPS nav device, and you want to mount your personal mobile device safely and securely to the dash of your vehicle without drilling any holes, you can add the SoundGate M2 universal mobile device. Great for leased vehicles, company cars and rental cars and vehicles.
Important Application Information:
Compatible with all models of 1998-2006 Audi equipped with 13-pin DIN cable in the rear of the vehicle (driver's side).
NOT compatible with vehicles pre-wired with an 8-pin DIN connector.
For non-prewired vehicles or for 2003-2006 Audi vehicles with 8-pin data port at the headunit, see the VWR-AUX.
Specific Vehicle Application List:
For vehicles that are pre-wired for a CD changer with the 13-pin connector in the rear of the vehicle:
2006 A3
1998-2005 A4
1998-2005 A6
1998-2005 A8
2001-2005 Allroad
2003 RS6
2000-2005 S4
2002-2003 S6
2001-2003 S8
2000-2005 TT
Does Logjam Electronics Price Match?....Maybe! Click here to find out!