Installation is simple, as the interface plugs into the 16-pin connector at the rear of your factory radio using the vehicle specific cable that comes with the interface. The 16-pin connector, shown in the image at right, is one of the three connectors in Ford's "Phase II" 8-pin/16-pin/24-pin connector configuration (click image see larger photo of all 3 connectors).

Depending on what factory options your vehicle has, there could already be a factory wiring harness plugged into the 16-pin radio connector. The wiring harness that comes with this interface device is designed with a 'Y' connector that allows you to reconnect the factory wiring harness, if so equipped, once the interface is installed, keeping all existing factory options functional. If there is no factory wiring harness plugged into the 16-pin connector, the 16-pin 'Y' harness will remain empty after installation.

With this device installed, you will have created an auxiliary audio input to your factory radio, which will now allow you to plug in any external audio source, like the audio from a portable MP3 player, satellite tuner, DVD player, or iPOD, into the left & right RCA-type connectors (shown at left), and play the audio from that external audio device directly through your factory radio. This is a direct-connect device and NOT an FM Modulator. An FM modulator requires you to tune to an FM radio station in order to listen to the audio from the external audio device. This device does not work like that.

IMPORTANT APPLICATION NOTES: